Ballistic Helmet - Delta 3

Description: The lightweight Delta 3 Helmet is the next generation of fortification. Weighing less than 3 pounds, it is designed for comfort and performance, exceeding NIJ 0106.01 standards for Level IIIA protection. High-tech features include an internal shock-absorbing foam suspension system and an adjustable three-point retention system.

Features

• Manufactured with lightweight high-performance multi-layered aramid construction
• Adjustable 3-point retention strap with flexible chin cup and snap & Velcro® release system
• Internal shock-absorbing foam suspension system for impact protection and air circulation
• NIJ 0106.01 Level IIIA protection

Ballistic Helmet - Delta LT

Description: At just two pounds, the ergonomic Delta LT™ is 20 to 30 percent lighter than other Level IIIA helmets-yet delivers better protection. Crafted of high-tech, aerospace aramid materials, it is contoured to create a larger field of vision and enhanced field mobility. It also offers better compatibility with gas masks, goggles and communications gear.

Features

• Manufactured from multiple layers of lightweight, high-tech aramid composite laminated under heat and pressure
• Lightest Level IIIA ballistic helmet on the market today
• Internal shock-absorbing foam suspension system for impact protection and maximum air circulation
• Three-point adjustable retention system with flexible chin cup and snap & Velcro® release system
• NIJ 0106.01 Level IIIA protection

Ballistic Face Shield - 702 L

Description: Single-hit capability, PROTECH's Ballistic Faceshields are designed to defeat the 9mm 124 grain, FMJ rounds and lesser threats in excess of 1,200 fps. Manufactured with tough, scratch-resistant acrylic frontal plate and bullet-resistant polycarbonate inner plate.

Features

• Uniform lamination of both transparencies to provide the finest ballistic protection available
• Curved design for protection of entire face area, from helmet brim to below chin area
• PROTECH's unique band-fastening system permits quick attachment or detachment with most ballistic helmets
• Specialized mar-resistant outer layer on Multi-Hit Ballistic Faceshield
• Dimensions are 6 x 15 inch (15 x 38 cm), approximately 2.5 lbs. (1.1 kg)
• Carry bag available

Ballistic Face Shield - 702 M

Description: Multi-hit capability, PROTECH's Ballistic Faceshields are designed to defeat the 9mm 124 grain, FMJ rounds and lesser threats in excess of 1,200 fps. Manufactured with tough, scratch-resistant acrylic frontal plate and bullet-resistant polycarbonate inner plate.

Features

• Uniform lamination of both transparencies to provide the finest ballistic protection available
• Curved design for protection of entire face area, from helmet brim to below chin area
• PROTECH's unique band-fastening system permits quick attachment or detachment with most ballistic helmets
• Specialized mar-resistant outer layer on Multi-Hit Ballistic Faceshield
• Dimensions are 6 x 15 inch (15 x 38 cm), approximately 2.5 lbs. (1.1 kg)
• Carry bag available

Ballistic Face Shield - 702 MT

Description: Multi-hit Tokarev capability, PROTECH's Ballistic Faceshields are designed to defeat the 9mm 124 grain, FMJ rounds and lesser threats in excess of 1,200 fps. Manufactured with tough, scratch-resistant acrylic frontal plate and bullet-resistant polycarbonate inner plate.

Features

• Uniform lamination of both transparencies to provide the finest ballistic protection available
• Curved design for protection of entire face area, from helmet brim to below chin area
• PROTECH's unique band-fastening system permits quick attachment or detachment with most ballistic helmets
• Specialized mar-resistant outer layer on Multi-Hit Ballistic Faceshield
• Dimensions are 6 x 15 inch (15 x 38 cm), approximately 2.5 lbs. (1.1 kg)
• Carry bag available

Riot Control Helmets - TR1000

Description: The TR1000 Tactical Riot Helmet is designed to offer a complete tactical package without sacrificing protection or comfort. With a lightweight, molded polycarbonate shell and expanded polystyrene liner, the TR1000 meets or exceeds NIJ 0104.02 (Riot) and NIJ 0105.01 (Crash) standards.

Features

• New Echo® quick-release, high-retention system with flexible chin cup
• Unique detachable strip pad suspension system
• Washable, removable Hydrofil® Dri-Lex® fabric liners for moisture wicking and increased air flow
• NIJ 0104.02 3mm tactical faceshield with liquid seal
• Two shell sizes
• Weighs 3.1 lbs
• Flat black or flat navy

Riot Control Helmets - TR2000

Description: The TR2000 is the lightest weight, nonballistic tactical helmet on the market today. The molded fiberglass and Kevlar reinforced shell offers response teams the protection and coverage needed during tactical maneuvers. The TR2000 meets or exceeds NIJ 0104.02 (Riot) and NIJ 0105.01 (Crash) standards.

Features

• New Echo® quick-release, high-retention system with flexible chin cup
• Unique detachable strip pad suspension system
• Washable, removable Hydrofil® Dri-Lex® fabric liners for moisture wicking and increased air flow
• NIJ 0104.02 3mm tactical faceshield with liquid seal
• Two shell sizes
• Weighs 2.8 lbs
• Flat black or flat navy

Riot Control Helmets - TR2200

Description: The TR2200 is the lightest weight, nonballistic tactical helmet on the market today. The molded fiberglass and Kevlar reinforced shell offers response teams the protection and coverage needed during tactical maneuvers. The TR2200 meets or exceeds NIJ 0104.02 (Riot) and NIJ 0105.01 (Crash) standards.

Features

• Integral molded visor allows a gas mask to fit underneath
• New Echo® quick-release, high-retention system with flexible chin cup
• Unique detachable strip pad suspension system
• Washable, removable Hydrofil® Dri-Lex® fabric liners for moisture wicking and increased air flow
• NIJ 0104.02 3mm tactical faceshield with liquid seal
• Two shell sizes
• Weighs 2.8 lbs
• Flat black or flat navy

Riot Control Helmets - CR2001

Description: The new PROTECH™ CR2001 Full Coverage Tactical/Riot/Corrections helmet (formerly the SWAT2001) is constructed to provide maximum coverage and comfort. The liner is made of expanded Polystyrene and is intended to provide maximum energy attenuation. The CR2001 is designed to accept a riot face shield system. The CR2001 meets or exceeds NIJ 0104.02 (Riot) and NIJ 0105.01 (Crash) standards.

Features

• Lightweight, thermo molded fiberglass and Kevlar® shell Expanded polystyrene liner for added protection
• New Echo quick-release High-retention harness with flexible chin cup
• EPS liner is fitted with an ABS cap for easy cleaning and decontamination as well as liner protection
• Unique Combi-Fit Pad suspension system
• Will accept most protective (gas) masks
• NIJ 0104.02 - 3mm tactical (optical grade) face shield with liquid seal
• Designed flare shell accommodates use of shoulder weapon while wearing helmet
• Two shell sizes
• Weighs 3.1 lbs (1.41 kg)

Riot Control Helmets - CR2001 GRD

Description: The new PROTECH™ CR2001/GRD Full Coverage Tactical/Riot/Corrections helmet (formerly the SWAT2001/GRD) is constructed to provide maximum coverage and comfort. The liner is made of expanded Polystyrene and is intended to provide maximum energy attenuation. The CR2001/GRD is designed to accept a riot face shield system. The CR2001/GRD meets or exceeds NIJ 0104.02 (Riot) and NIJ 0105.01 (Crash) standards.

Features

• Lightweight, thermo molded fiberglass and Kevlar® shell
• Expanded polystyrene liner for added protection
• New Echo quick-release
• High-retention harness with flexible chin cup
• EPS liner is fitted with an ABS cap for easy cleaning and decontamination as well as liner protection
• Unique Combi-Fit Pad suspension system
• Will accept most protective (gas) masks
• NIJ 0104.02 - 3mm tactical (optical grade) face shield with liquid seal
• Designed flare shell accommodates use of shoulder weapon while wearing helmet
• Two shell sizes
• Weighs 3.1 lbs (1.41 kg)

ESP P07 012 Ballistic Helmet

The ESP manufactured P07 012 model ballistic helmet is designed for use by military forces and police. The helmet shell is made from an aramide based composite material, providing NIJ Standard level 111A protection, and weighs 1.4kg.

The shell's total circumference is surface finished with a plastic lining. These helmets are equipped with a special insert with a high enough absorption effect to eliminate almost any impact of kinetic energy produced by a projectile or splinter. Simultaneously, the construction design provides both excellent ventilation properties and highly comfortable wear ability. In addition, the P07 012 helmet is particularly easy to adapt for most head circumferences.

Wearing without any movement is assured with the three point fixation chin strap system. The fixing system has a quick release buckle, and the whole fastening is ensured with a security cut out which is designed to loosen the helmet in case of any higher level of stress and help prevent any damage to the neck muscles and vertebrae.

This helmet ensures that the head protection has the identical grade of ballistic protection all over the shell surface, including the fixing screws of the fastening belts.

The helmet can also be equipped with a communication device.